50" x 10" TRAK DPMV3 Bed Milling Machine with the ProtoTRAK VM CNC, 5 HP, 2005 WITH POWER DRAWBAR Machine specifications • Table size - 50" x 10" • T-slots (number x width x pitch) -- 3 x .63" x 2.48" • Travel (X, Y, Z axis) -- 31" x 17" x 21" • Quill diameter -- 4.13" • Spindle Taper - #40 • Spindle speed range RPM -- 200-5000 • Spindle center to column of face -- 19.2" • Spindle motor power -- 5 HP • Power requirement -- 50 HZ/60 HZ; 3 Phase; 220V; 30 FLA • Machine net weight -- 4070 lbs. • Maximum weight on table -- 1320 lbs. • Height of table from bottom of bed -- 38" • Maximum spindle nose to table -- 21" • Minimum table height -- 85" • Maximum table height -- 100" • Width of machine including table -- 73" • Length of electric box door closed -- 76" • Overall width including full table traverse -- 104" • Overall length with electrical door open -- 100" • Footprint (width x depth) -- 24" x 44" • Way surface -- dovetail x axis, square ways Y and Z axis • Weight (approximate) net -- 4100 lbs. • Weight (approximate) shipping -- 4400 lbs. • Pallet size -- 6' x 6' • Maximum work capacities -- Drilling (mild steel) max. dia. 1.00"; tapping, 5/8"; milling capacities, 5 inch3/min • Way surfaces hardened and ground • Turcite coating on all slide ways • Automatic lubrication pump • Quill diameter 4.13" ProtoTRAK VM CNC - the control on the TRAK V Series Bed Mills Hardware Specifications • Two or three-axis CNC, three-axis DRO • Pentium processor with built-in video and Ethernet ...
Keywords: 5 HP, 2005 WITH POWER DRAWBAR
No comments:
Post a Comment